Total Twaddle

Idle Chat. => Totally Computers => Topic started by: Tâf on April 08, 2019, 20:36:34 pm

Title: Geforce GTX1060
Post by: Tâf on April 08, 2019, 20:36:34 pm
My bro's graphics card started smearing the screen, so he bought a Aorus Geforce GTX1060 6GB GDDDRS from Amazon..

I had to shoe-horn it in (very, very carefully). PCI3 power connected (6+2). Booted. Nowt.

It just hangs on the bios screen in both hmdi and DVI-D modes (at first the DVI-D lead would not go in fully as the "blade connector" had to force it's way through a badly moulded hole).

I suspected the maxiumum length card was pushing down on the mobo's SATA data leads for the SSD boot unit. So I cleared a bit of space by rerouting some fat cables to under the mobo.

Still nowt. And the PC self-reboots if turned off.

I refitted the old card, and all works apart from the smearing.

He has a Corsair 750w PSU that should handle it, but with 3 HD's, 2 DVD players, and SSD and a separte sound card, I think it might be hitting it's limits, causing the PSU to reduce a voltage.

But it's spec says "LED power indicators. Be alert when PCI-E voltage is unstable with the smart power LED indicators. When experiencing any power abnormality, the indicator will alert gamers by flashing light."

But those led's don't flash.... ???
Title: Re: Geforce GTX1060
Post by: Tâf on April 09, 2019, 20:32:46 pm
I removed power from the 3 HDs and 2 DVD's and tried again. Nowt.

So it's going back DOA.